connecting to Nexus NX2 server

Istvan Rutai's Avatar

Istvan Rutai

15 Aug, 2013 08:25 PM

I have problem to connect to NX2 server. Only Input A is receiving on baud 4800 and only see depth and GPS position.
The input 2 led is not blinking.

Thnx

  1. Support Staff 1 Posted by kevin.dolan on 16 Aug, 2013 04:40 PM

    kevin.dolan's Avatar

    Hello Istvan,

    I might need some more information to help you solve this issue and we might in the end find that the issue is inside the settings of the NX2 Server but I will to my best to help. Please give me a brief description of how the box is wired and to what devices. If you are only connected to an NX2 Server than you only need to use one port. The Green wire is default set to 4800 baud and the Orange wire is set to 38400. (Both can be changed using the DMK App)

    If you are getting some of the info from the NX2 Server and it looks valid than most likely you have a good connection. In this case you may be required to turn on the output of the other sentences in the NX2 Server settings. I will read the manual and add more soon.

Reply to this discussion

Internal reply

Formatting help / Preview (switch to plain text) No formatting (switch to Markdown)

Attaching KB article:

»

Attached Files

You can attach files up to 10MB

If you don't have an account yet, we need to confirm you're human and not a machine trying to post spam.

Keyboard shortcuts

Generic

? Show this help
ESC Blurs the current field

Comment Form

r Focus the comment reply box
^ + ↩ Submit the comment

You can use Command ⌘ instead of Control ^ on Mac